Qualifications:

1-3 years’ of previous welding experience required. Welding Certification preferred but not essential. There are no minimum academic requirements. Further training will be provided on-the-job as required. Candidates must be able to mig weld, perform fillet welds and read drawings

General Duties / Responsibilities / Experience:

- To operate welding equipment in order to join metalwork pieces together

- To use fusion welding processes based on various techniques and materials

- To perform simple visual inspection of welds

- To perform fillet welds, mig welding and to read drawings

- To wear appropriate protective gear and adhere to safety standards

- To smooth burred surfaces and recognise metal imperfections

- This role requires knowledge of welding techniques, torch temperature for metal processes, metal thermal conductivity and fuel gas

- Essential knowledge includes welding from drawings (2D and 3D), mig welding and fillet welds

- Essential skills include aligning components, joining metals and operating welding equipment, including oxy-fuel torch

- Candidates must be competent to apply arc welding techniques and precision metalworking techniques

- Candidates must be competent to ensure correct metal temperature and handle fuels

- Candidates must have experience in recognising signs of corrosion and removing inadequate workpieces

- Candidates must have experience in performing metal active gas welding and inert gas welding

- Candidates must have 1-3 years’ of relevant experience as a Welder

Annual Remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: PJ Martley Limited, Kilminchy, Dublin Road, Portlaoise, Co. Laois, R32 CPA4

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Diagnose complex mechanical, electrical, and electronic vehicle faults using advanced manufacturer[1]approved diagnostic equipment and software.

Perform comprehensive fault analysis on engine management, transmission, braking, steering, suspension, and powertrain systems to identify root causes of technical failures.

Inspect, calibrate, and repair advanced vehicle electronic control units (ECUs), sensors, actuators, and integrated onboard systems in accordance with manufacturer specifications.

Execute complex repairs on hybrid and electric vehicle systems while complying with high-voltage safety procedures and technical standards.

Analyse diagnostic data, technical service bulletins, and repair documentation to develop effective corrective maintenance solutions.

Carry out precision testing, calibration, and performance verification of vehicle systems following major repair or component replacement.

Evaluate vehicle performance using computerised diagnostic platforms and recommend technical improvements to optimise operational reliability.

Maintain detailed digital service records, diagnostic reports, repair documentation, and quality assurance records in accordance with organisational compliance standards.

Weekly working hours: 39

Our client, Assured Personnel Limited, based in Swords, Co. Dublin, is currently seeking Body Shop Panel Beaters for immediate start at their facility in Swords, Co. Dublin.

Key Responsibilities & Duties

- To assess and repair damage on a variety of heavy goods vehicles (HGVs), buses, and plant machinery.

- To realign chassis, remove and replace damaged panels, and carry out fabrication and structural repairs.

- To operate equipment such as heavy-duty jigs, hydraulic presses, and welding tools.

- To conduct cutting, grinding, and MIG/MAG/TIG welding on steel and aluminium components.

- To carry out pre- and post-repair inspections to ensure compliance with safety and quality standards.

- To collaborate with paint technicians and workshop staff to complete jobs efficiently.

- To maintain accurate job cards and work reports.

- To adhere to health and safety standards specific to heavy vehicle repair environments.

- Minimum of 3 years previous experience in a Panel Beater role

- Experience with commercial trucks and plant vehicles is an advantage

- Candidate must be competent to carry out high-quality structural and cosmetic repairs on heavy-duty vehicles and machinery

- Panel Beater certification is a plus but is not mandatory

- Strong welding and metal fabrication skills.

- Proven ability to work on large-scale body structures and heavy vehicle chassis.

- Comfortable using diagnostic and measuring tools for large vehicles.

- Knowledge of body repair processes for articulated lorries, tippers, buses, and diggers.

- Experience with fibreglass and composite materials is a plus.

- Certification in welding or heavy vehicle structural repair is a bonus

Annual Remuneration: €45,000.00; Pay rate € 22.19 per hour

Work Location: Assured Personnel Limited, Airside Motor Park, Airside Retail Park, Swords, Co. Dublin, K67 TE83.

Number of hours work each week: 39

Our client, Assured Personnel Limited, based in Swords, Co. Dublin, is currently seeking Body Shop Panel Beaters for immediate start at their facility in Swords, Co. Dublin.

Key Responsibilities & Duties

- To assess and repair damage on a variety of heavy goods vehicles (HGVs), buses, and plant machinery.

- To realign chassis, remove and replace damaged panels, and carry out fabrication and structural repairs.

- To operate equipment such as heavy-duty jigs, hydraulic presses, and welding tools.

- To conduct cutting, grinding, and MIG/MAG/TIG welding on steel and aluminium components.

- To carry out pre- and post-repair inspections to ensure compliance with safety and quality standards.

- To collaborate with paint technicians and workshop staff to complete jobs efficiently.

- To maintain accurate job cards and work reports.

- To adhere to health and safety standards specific to heavy vehicle repair environments.

- Minimum of 3 years previous experience in a Panel Beater role

- Experience with commercial trucks and plant vehicles is an advantage

- Candidate must be competent to carry out high-quality structural and cosmetic repairs on heavy-duty vehicles and machinery

- Panel Beater certification is a plus but is not mandatory

- Strong welding and metal fabrication skills.

- Proven ability to work on large-scale body structures and heavy vehicle chassis.

- Comfortable using diagnostic and measuring tools for large vehicles.

- Knowledge of body repair processes for articulated lorries, tippers, buses, and diggers.

- Experience with fibreglass and composite materials is a plus.

- Certification in welding or heavy vehicle structural repair is a bonus

Annual Remuneration: €42,000.00; Pay rate € 20.71 per hour

Work Location: Assured Personnel Limited, Airside Motor Park, Airside Retail Park, Swords, Co. Dublin, K67 TE83.

Number of hours work each week: 39

Our client, Assured Personnel Limited, based in Swords, Co. Dublin, is currently seeking Body Shop Panel Beaters for immediate start at their facility in Swords, Co. Dublin.

Key Responsibilities & Duties

- To assess and repair damage on a variety of heavy goods vehicles (HGVs), buses, and plant machinery.

- To realign chassis, remove and replace damaged panels, and carry out fabrication and structural repairs.

- To operate equipment such as heavy-duty jigs, hydraulic presses, and welding tools.

- To conduct cutting, grinding, and MIG/MAG/TIG welding on steel and aluminium components.

- To carry out pre- and post-repair inspections to ensure compliance with safety and quality standards.

- To collaborate with paint technicians and workshop staff to complete jobs efficiently.

- To maintain accurate job cards and work reports.

- To adhere to health and safety standards specific to heavy vehicle repair environments.

- Minimum of 3 years previous experience in a Panel Beater role

- Experience with commercial trucks and plant vehicles is an advantage

- Candidate must be competent to carry out high-quality structural and cosmetic repairs on heavy-duty vehicles and machinery

- Panel Beater certification is a plus but is not mandatory

- Strong welding and metal fabrication skills.

- Proven ability to work on large-scale body structures and heavy vehicle chassis.

- Comfortable using diagnostic and measuring tools for large vehicles.

- Knowledge of body repair processes for articulated lorries, tippers, buses, and diggers.

- Experience with fibreglass and composite materials is a plus.

- Certification in welding or heavy vehicle structural repair is a bonus

Annual Remuneration: €40,000.00; Pay rate €19.72 per hour 

Work Location: Assured Personnel Limited, Airside Motor Park, Airside Retail Park, Swords, Co. Dublin, K67 TE83.

Number of hours work each week: 39

Key Responsibilities & Duties

- To assess and repair damage on a variety of heavy goods vehicles (HGVs), buses, and plant machinery.

- To realign chassis, remove and replace damaged panels, and carry out fabrication and structural repairs.

- To operate equipment such as heavy-duty jigs, hydraulic presses, and welding tools.

- To conduct cutting, grinding, and MIG/MAG/TIG welding on steel and aluminium components.

- To carry out pre- and post-repair inspections to ensure compliance with safety and quality standards.

- To collaborate with paint technicians and workshop staff to complete jobs efficiently.

- To maintain accurate job cards and work reports.

- To adhere to health and safety standards specific to heavy vehicle repair environments.

- Minimum of 3 years previous experience in a Panel Beater role

- Experience with commercial trucks and plant vehicles is an advantage

- Candidate must be competent to carry out high-quality structural and cosmetic repairs on heavy-duty vehicles and machinery

- Panel Beater certification is a plus but is not mandatory

- Strong welding and metal fabrication skills.

- Proven ability to work on large-scale body structures and heavy vehicle chassis.

- Comfortable using diagnostic and measuring tools for large vehicles.

- Knowledge of body repair processes for articulated lorries, tippers, buses, and diggers.

- Experience with fibreglass and composite materials is a plus.

- Certification in welding or heavy vehicle structural repair is a bonus

Annual remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: Rt Commercial Painters Limited, Donagh, Glaslough, Monaghan, H18 KX88

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Key Responsibilities & Duties

- To assess and repair damage on a variety of heavy goods vehicles (HGVs), buses, and plant machinery.

- To realign chassis, remove and replace damaged panels, and carry out fabrication and structural repairs.

- To operate equipment such as heavy-duty jigs, hydraulic presses, and welding tools.

- To conduct cutting, grinding, and MIG/MAG/TIG welding on steel and aluminium components.

- To carry out pre- and post-repair inspections to ensure compliance with safety and quality standards.

- To collaborate with paint technicians and workshop staff to complete jobs efficiently.

- To maintain accurate job cards and work reports.

- To adhere to health and safety standards specific to heavy vehicle repair environments.

Requirements: Skills & Experience

- Minimum of 3 years previous experience in a Panel Beater role

- Experience with commercial trucks and plant vehicles is an advantage

- Candidate must be competent to carry out high-quality structural and cosmetic repairs on heavy-duty vehicles and machinery

- Panel Beater certification is a plus but is not mandatory

- Strong welding and metal fabrication skills.

- Proven ability to work on large-scale body structures and heavy vehicle chassis.

- Comfortable using diagnostic and measuring tools for large vehicles.

- Knowledge of body repair processes for articulated lorries, tippers, buses, and diggers.

- Experience with fibreglass and composite materials is a plus.

- Certification in welding or heavy vehicle structural repair is a bonus

Annual remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: Pudaxa Limited, Unit 12 Shannon Valley Centre, Turvey Lane, Donabate, Co. Dublin, K36 P589

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Key Responsibilities & Duties

- To assess and repair damage on a variety of heavy goods vehicles (HGVs), buses, and plant machinery.

- To realign chassis, remove and replace damaged panels, and carry out fabrication and structural repairs.

- To operate equipment such as heavy-duty jigs, hydraulic presses, and welding tools.

- To conduct cutting, grinding, and MIG/MAG/TIG welding on steel and aluminium components.

- To carry out pre- and post-repair inspections to ensure compliance with safety and quality standards.

- To collaborate with paint technicians and workshop staff to complete jobs efficiently.

- To maintain accurate job cards and work reports.

- To adhere to health and safety standards specific to heavy vehicle repair environments.

Requirements: Skills & Experience

- Minimum of 3 years previous experience in a Panel Beater role

- Experience with commercial trucks and plant vehicles is an advantage

- Candidate must be competent to carry out high-quality structural and cosmetic repairs on heavy-duty vehicles and machinery

- Panel Beater certification is a plus but is not mandatory

- Strong welding and metal fabrication skills.

- Proven ability to work on large-scale body structures and heavy vehicle chassis.

- Comfortable using diagnostic and measuring tools for large vehicles.

- Knowledge of body repair processes for articulated lorries, tippers, buses, and diggers.

- Experience with fibreglass and composite materials is a plus.

- Certification in welding or heavy vehicle structural repair is a bonus

Annual remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: PJ Martley Limited, Kilminchy, Dublin Road, Portlaoise, Co. Laois, R32 CPA4

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Qualifications:

3 years’ of previous experience as a Bus Mechanic is required. Mechanic certification preferred but not essential. There are no minimum academic requirements. Further training will be provided on-the-job as required.

General Duties / Responsibilities / Experience:

- To maintain, diagnose and repair a fleet of buses to ensure they are operating safely and efficiently

- To perform routine inspections, servicing, and preventive maintenance on buses

- To diagnose and repair mechanical, electrical, and hydraulic systems, including engines, transmissions, brakes, and suspension

- To identify and rectify faults using diagnostic equipment and manual troubleshooting methods

- To ensure all repairs and maintenance meet safety and regulatory standards.

- To carry out emergency roadside repairs when required

- To maintain accurate records of maintenance and repairs performed

- To adhere to workplace safety protocols and environmental regulations

- To work as part of a team to ensure an efficient and timely maintenance schedule

- To provide technical support and guidance to apprentices or junior mechanics

- Essential knowledge includes technical expertise in heavy vehicle mechanics and a commitment to high-quality service standards

- Further essential knowledge includes strong understanding of bus and heavy vehicle mechanics, including engines, transmissions, braking systems, and suspensions

- Required technical skills include strong knowledge of diesel engines, electrical systems, air brakes, and diagnostics

- Further required skills include ability to identify and address mechanical issues accurately,

- Candidates must be competent to identify and carry out preventative and reactive maintenance on fleet of passenger buses

- Candidates must be competent to use diagnostic tools, computer software, and manual troubleshooting techniques to identify and fix issues

- Mechanic certification preferred but not essential

- Candidate must have at least 3 years of previous experience as a Bus Mechanic

Annual Remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: PJ Martley Limited, Kilminchy, Dublin Road, Portlaoise, Co. Laois, R32 CPA4

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Duties & Responsibilities

- Diagnose mechanical and electrical issues in vehicles using diagnostic tools and test drives.

- Perform routine maintenance tasks such as oil changes, brake servicing, tyre repairs, alignments, and fluid checks.

- Carry out repairs on engines, transmissions, steering systems, suspension, exhaust systems, and other mechanical components.

- Inspect vehicles for faults, wear, and potential issues, providing accurate repair recommendations.

- Complete service and repair records accurately and in line with company procedures.

- Ensure all work is carried out to manufacturer standards and meets safety and compliance requirements.

- Communicate effectively with service advisors and customers regarding necessary repairs and timelines.

- Maintain a clean, organised, and safe workshop area.

- Keep up to date with new vehicle technologies, diagnostic methods, and repair procedures.

Requirements & Experience

- Candidate must be competent to carry out all duties listed above

- Minimum 3 years of previous experience working as a mechanic

- Mechanic/motor technician qualification is an advantage but is not required

- Proven experience working as a car mechanic or vehicle technician.

- Experience working in a garage and with fleet of vehicles

- Knowledge of vehicle electronics and diagnostics

- Strong mechanical, electrical, and diagnostic skills.

- Ability to use modern diagnostic equipment and workshop tools.

- Good problem-solving skills and attention to detail.

- Ability to work independently and as part of a team.

- Strong communication and customer service skills.

- Commitment to maintaining high quality and safety standards.

Annual Remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: Marcin & Piotr Motors Santry Limited t/a MP Motors, Old Airport Road, Santry, Dublin 9, Co. Dublin

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Our client, Assured Personnel Limited, based in Swords, Co. Dublin, is currently seeking Car Mechanics for immediate start at their facility in Swords, Co. Dublin.

- Diagnose mechanical and electrical issues in vehicles using diagnostic tools and test drives.

- Perform routine maintenance tasks such as oil changes, brake servicing, tyre repairs, alignments, and fluid checks.

- Carry out repairs on engines, transmissions, steering systems, suspension, exhaust systems, and other mechanical components.

- Inspect vehicles for faults, wear, and potential issues, providing accurate repair recommendations.

- Complete service and repair records accurately and in line with company procedures.

- Ensure all work is carried out to manufacturer standards and meets safety and compliance requirements.

- Communicate effectively with service advisors and customers regarding necessary repairs and timelines.

- Maintain a clean, organised, and safe workshop area.

- Keep up to date with new vehicle technologies, diagnostic methods, and repair procedures.

  

Requirements & Experience

- Candidate must be competent to carry out all duties listed above

- Minimum 3 years of previous experience working as a mechanic

- Mechanic/motor technician qualification is an advantage but is not required

- Proven experience working as a car mechanic or vehicle technician.

- Experience working in a garage and with fleet of vehicles

- Knowledge of vehicle electronics and diagnostics

- Strong mechanical, electrical, and diagnostic skills.

- Ability to use modern diagnostic equipment and workshop tools.

- Good problem-solving skills and attention to detail.

- Ability to work independently and as part of a team.

- Strong communication and customer service skills.

- Commitment to maintaining high quality and safety standards.

Annual Remuneration:pasting €45,000.00; Pay rate € 22.19 per hour 

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Our client, Assured Personnel Limited, based in Swords, Co. Dublin, is currently seeking Car Mechanics for immediate start at their facility in Swords, Co. Dublin.

- Diagnose mechanical and electrical issues in vehicles using diagnostic tools and test drives.

- Perform routine maintenance tasks such as oil changes, brake servicing, tyre repairs, alignments, and fluid checks.

- Carry out repairs on engines, transmissions, steering systems, suspension, exhaust systems, and other mechanical components.

- Inspect vehicles for faults, wear, and potential issues, providing accurate repair recommendations.

- Complete service and repair records accurately and in line with company procedures.

- Ensure all work is carried out to manufacturer standards and meets safety and compliance requirements.

- Communicate effectively with service advisors and customers regarding necessary repairs and timelines.

- Maintain a clean, organised, and safe workshop area.

- Keep up to date with new vehicle technologies, diagnostic methods, and repair procedures.

  

Requirements & Experience

- Candidate must be competent to carry out all duties listed above

- Minimum 3 years of previous experience working as a mechanic

- Mechanic/motor technician qualification is an advantage but is not required

- Proven experience working as a car mechanic or vehicle technician.

- Experience working in a garage and with fleet of vehicles

- Knowledge of vehicle electronics and diagnostics

- Strong mechanical, electrical, and diagnostic skills.

- Ability to use modern diagnostic equipment and workshop tools.

- Good problem-solving skills and attention to detail.

- Ability to work independently and as part of a team.

- Strong communication and customer service skills.

- Commitment to maintaining high quality and safety standards.

Annual Remuneration: €42,000.00; Pay rate € 20.71 per hour

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Our client, Assured Personnel Limited, based in Swords, Co. Dublin, is currently seeking Car Mechanics for immediate start at their facility in Swords, Co. Dublin.

- Diagnose mechanical and electrical issues in vehicles using diagnostic tools and test drives.

- Perform routine maintenance tasks such as oil changes, brake servicing, tyre repairs, alignments, and fluid checks.

- Carry out repairs on engines, transmissions, steering systems, suspension, exhaust systems, and other mechanical components.

- Inspect vehicles for faults, wear, and potential issues, providing accurate repair recommendations.

- Complete service and repair records accurately and in line with company procedures.

- Ensure all work is carried out to manufacturer standards and meets safety and compliance requirements.

- Communicate effectively with service advisors and customers regarding necessary repairs and timelines.

- Maintain a clean, organised, and safe workshop area.

- Keep up to date with new vehicle technologies, diagnostic methods, and repair procedures.

  

Requirements & Experience

- Candidate must be competent to carry out all duties listed above

- Minimum 3 years of previous experience working as a mechanic

- Mechanic/motor technician qualification is an advantage but is not required

- Proven experience working as a car mechanic or vehicle technician.

- Experience working in a garage and with fleet of vehicles

- Knowledge of vehicle electronics and diagnostics

- Strong mechanical, electrical, and diagnostic skills.

- Ability to use modern diagnostic equipment and workshop tools.

- Good problem-solving skills and attention to detail.

- Ability to work independently and as part of a team.

- Strong communication and customer service skills.

- Commitment to maintaining high quality and safety standards.

Annual Remuneration: €40,000.00; Pay rate €19.72 per hour

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Key Responsibilities & Duties:

- To diagnose, repair and maintain a variety of cranes and heavy equipment to ensure they operate safely and efficiently

- To perform both preventative maintenance and breakdown response, working with hydraulic, electrical, and mechanical systems

- To perform inspection, maintenance, and repair work on mobile and static cranes, including hydraulic, mechanical, and electrical systems

- To diagnose faults in engines, transmissions, and other crane components using diagnostic tools and technical manuals

- To overhaul and service diesel and heavy-duty engines used in cranes and other heavy machinery

- To conduct scheduled preventative maintenance to minimize downtime and extend equipment lifespan

- To replace or repair worn or defective parts and ensure compliance with manufacturer specifications

- To carry out testing and calibration of crane systems after repairs

- To maintain accurate service and repair records in accordance with company procedures

- To ensure all work is completed safely and in compliance with health, safety, and environmental regulations

- To collaborate with operators, engineers, and management to plan maintenance and repair schedules

- To keep tools, equipment, and work areas clean, safe, and well-organized

Requirements:

- Candidates must have the requisite experience and knowledge to perform all job duties listed above

- Trade qualification as a Heavy Equipment Mechanic, Diesel Mechanic, or equivalent

- Minimum 3–5 years of experience working on cranes (e.g., mobile cranes, tower cranes, or overhead cranes) and other heavy equipment in a field service capacity

- Experience working on engines such as Cummins, Liebherr, Caterpillar, MTU

- Strong knowledge of diesel engines, hydraulic systems, and electrical controls

- Ability to interpret technical drawings, service manuals, and diagnostic data

- Experience using computerized diagnostic and calibration tools

- Proven ability to troubleshoot and repair complex mechanical issues efficiently.

- Commitment to safe work practices and continuous improvement.

Annual Remuneration: €56,784.00; Pay Rate €28.00 per hour

Work Locations:

- Armorum Limited, Kylemore Park North, Ballyfermot, Co. Dublin, D10 TN56

- Armorum Limited, JFK Industrial Estate, Bluebell, Co. Dublin, D12 TC60

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Key Responsibilities & Duties:

- To diagnose, service, repair, and overhaul diesel engines used in heavy equipment, cranes, trucks, generators, and industrial machinery

- To diagnose, service, and repair diesel engines and related components in heavy equipment and vehicles

- To conduct engine overhauls, rebuilds, and component replacements in accordance with manufacturer specifications

- To perform preventive maintenance, inspections, and tune-ups to ensure optimal performance and reliability

- To troubleshoot mechanical and electrical faults using diagnostic software, tools, and technical manuals

- To service and repair engine systems including fuel injection, turbocharging, exhaust, and cooling systems

- To work with major engine brands such as Liebherr, Caterpillar, Cummins and MTU

- To maintain accurate maintenance and repair records using company systems or service reports

- To follow all health, safety, and environmental procedures and ensure compliance with company policies

- To liaise with supervisors and parts departments to ensure timely completion of repairs and availability of components

Requirements:

- Candidates must have the requisite experience and knowledge to perform all job duties listed above

- Trade qualification or apprenticeship completion as a Diesel Mechanic, Heavy Equipment Technician, or equivalent.

- Minimum 3–5 years of hands-on experience working with heavy-duty diesel engines in a field service role

- Proven experience servicing and repairing engines from leading brands - Liebherr, Caterpillar, Cummins and MTU

- Strong understanding of engine diagnostics, hydraulics, and electrical systems.

- Ability to interpret technical manuals, schematics, and service bulletins.

- Proficient in the use of diagnostic and calibration tools.

- Excellent problem-solving and analytical skills.

- Strong commitment to safety, quality, and continuous improvement.

 

Annual Remuneration: €56,784.00; Pay Rate €28.00 per hour

Work Locations:

- Armorum Limited, Kylemore Park North, Ballyfermot, Co. Dublin, D10 TN56

- Armorum Limited, JFK Industrial Estate, Bluebell, Co. Dublin, D12 TC60

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Key Responsibilities & Duties:

- Diagnose, repair, and maintain electrical and electronic systems on tower cranes, including motors, sensors, limit switches, and control panels.

- Carry out regular inspections, preventative maintenance, and safety checks on crane electrical systems.

- Troubleshoot and repair PLCs, variable frequency drives, and other automated control systems.

- Work with onboard monitoring and diagnostic systems to identify and resolve faults.

- Install, calibrate, and maintain safety devices, alarms, and load monitoring systems in compliance with regulatory standards.

- Produce accurate service reports, inspection documentation, and maintenance records.

- Collaborate with mechanical engineers and field teams to ensure complete crane functionality.

- Ensure all work is performed safely and in compliance with site-specific and industry safety regulations.

- Travel to construction sites and work in varied field conditions.

 

Requirements:

- Candidates must have the requisite experience and knowledge to perform all job duties listed above

- Minimum 3–5 years of experience working on cranes (e.g., mobile cranes, tower cranes, or overhead cranes) and other heavy equipment in a field service capacity

- Experience working on brands such as Cummins, Liebherr, Caterpillar, MTU

- Qualified Electrician (or equivalent) with industrial, commercial, or heavy equipment experience.

- Proven experience in industrial or heavy machinery electrical systems, preferably cranes or lifting equipment.

- Strong understanding of AC/DC systems, motors, PLCs, sensors, and safety circuits.

- Experience reading and interpreting electrical schematics and wiring diagrams.

- Ability to work independently on-site with minimal supervision.

- Excellent troubleshooting and problem-solving skills.

- Awareness of tower crane safety regulations, LOLER/PUWER (or equivalent).

Annual Remuneration: €56,784.00; Pay Rate €28.00 per hour

Work Locations:

- Armorum Limited, Kylemore Park North, Ballyfermot, Co. Dublin, D10 TN56

- Armorum Limited, JFK Industrial Estate, Bluebell, Co. Dublin, D12 TC60

 

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Key Responsibilities & Duties:

- To provide high-quality maintenance and repair services for a range of cranes and lifting equipment

- To travel to customer locations to carry out inspections, servicing, diagnostics, and repairs on mobile, tower, and overhead cranes, ensuring that all equipment operates safely and efficiently

- Perform scheduled maintenance, fault diagnosis, and breakdown repairs on a variety of cranes and lifting machinery

- Troubleshoot and repair hydraulic, electrical, and mechanical systems on-site.

- Carry out safety inspections, load testing, and calibration of crane systems in accordance with company and regulatory standards

- Provide technical support and advice to clients, ensuring clear communication and minimal downtime

- Prepare detailed service and inspection reports and maintain accurate job documentation

- Work collaboratively with workshop and parts teams to coordinate repairs and parts supply

- Comply with all health, safety, and environmental standards during all field operations

Requirements:

- Candidates must have the requisite experience and knowledge to perform all job duties listed above

- Minimum 3–5 years of experience working on cranes (e.g., mobile cranes, tower cranes, or overhead cranes) and other heavy equipment in a field service capacity

- Trade qualification as service engineer, electrician, or equivalent

- Proven experience servicing and repairing cranes or heavy lifting equipment.

- Strong knowledge of hydraulics, diesel engines, and electrical systems.

- Ability to read technical drawings and use diagnostic tools.

- Excellent problem-solving and customer service skills.

- Experience working on brands such as Cummins, Liebherr, Caterpillar, MTU

- Skilled in electrical fault finding, including sensors, relays, CAN-bus, and PLC-controlled systems.

- Ability to interpret hydraulic and electrical schematics and use OEM diagnostic software.

- Experience with load indicators, limit switches, and safety systems in accordance with LOLER/PUWER (or equivalent).

- Proficient in using diagnostic tools, multimeters, and hydraulic test equipment.

- Capable of producing accurate service and inspection reports using digital systems.

Annual Remuneration: €56,784.00; Pay Rate €28.00 per hour

Work Locations:

- Armorum Limited, Kylemore Park North, Ballyfermot, Co. Dublin, D10 TN56

- Armorum Limited, JFK Industrial Estate, Bluebell, Co. Dublin, D12 TC60

 

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Qualifications:

2-3 years’ HGV mechanic experience required. Mechanic Certification preferred but not essential. There are no minimum academic requirements. Further training will be provided on-the-job as required.

- To fit, install, maintain, service and repair engines and the mechanical and related equipment of heavy goods vehicles.

- To detect and diagnose faults in engines and parts

- To fit, examine, test and service heavy goods vehicles and engines

- To replace engine components or complete engines

- To fit, examine, adjust, dismantle, rebuild and replace defective parts of HGVs

- Essential knowledge includes vehicle diagnostics, and repairing & diagnosing ABS/EBS brake systems

- Essential skills include diagnosis and repair of trucks, trailers and vans

- The candidate must have experience in installing and adjusting motors, brakes and steering

- The candidate must have experience in installing, adjusting and servicing mechatronics components of HGVs

- The candidate must have knowledge and experience of performing scheduled maintenance services such as oil changes and engine tune-ups, to achieve smooth running of vehicles and compliance with pollution regulations

- The candidate must be able to reassemble engines and parts after repairs

- A mechanic qualification or certificate is a bonus but is not mandatory

- 2-3 years’ of relevant experience as a HGV Mechanic is required

Qualifications:

2-3 years’ HGV mechanic experience required. Mechanic Certification preferred but not essential. There are no minimum academic requirements. Further training will be provided on-the-job as required.

General Duties / Responsibilities / Experience:

- To fit, install, maintain, service and repair engines and the mechanical and related equipment of heavy goods vehicles.

- To detect and diagnose faults in engines and parts

- To fit, examine, test and service heavy goods vehicles and engines

- To replace engine components or complete engines

- To fit, examine, adjust, dismantle, rebuild and replace defective parts of HGVs

- Essential knowledge includes vehicle diagnostics, and repairing & diagnosing ABS/EBS brake systems

- Essential skills include diagnosis and repair of trucks, trailers and vans

- The candidate must have experience in installing and adjusting motors, brakes and steering

- The candidate must have experience in installing, adjusting and servicing mechatronics components of HGVs

- The candidate must have knowledge and experience of performing scheduled maintenance services such as oil changes and engine tune-ups, to achieve smooth running of vehicles and compliance with pollution regulations

- The candidate must be able to reassemble engines and parts after repairs

- A mechanic qualification or certificate is a bonus but is not mandatory

- 2-3 years’ of relevant experience as a HGV Mechanic is required

Work Location: Rt Commercial Painters Limited, Donagh, Glaslough, Monaghan, H18 KX88

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Qualifications:

2-3 years of HGV mechanic experience required. Mechanic Certification preferred but not essential. There are no minimum academic requirements. Further training will be provided on-the-job as required.

General Duties / Responsibilities / Experience:

- To fit, install, maintain, service and repair engines and the mechanical and related equipment of heavy goods vehicles.

- To detect and diagnose faults in engines and parts

- To fit, examine, test and service heavy goods vehicles and engines

- To replace engine components or complete engines

- To fit, examine, adjust, dismantle, rebuild and replace defective parts of HGVs

- Essential knowledge includes vehicle diagnostics, and repairing & diagnosing ABS/EBS brake systems

- Essential skills include diagnosis and repair of trucks, trailers and vans

- The candidate must have experience in installing and adjusting motors, brakes and steering

- The candidate must have experience in installing, adjusting and servicing mechatronics components of HGVs

- The candidate must have knowledge and experience of performing scheduled maintenance services such as oil changes and engine tune-ups, to achieve smooth running of vehicles and compliance with pollution regulations

- The candidate must be able to reassemble engines and parts after repairs

- A mechanic qualification or certificate is a bonus but is not mandatory

- 2-3 years’ of relevant experience as a HGV Mechanic is required

Annual Remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: PJ Martley Limited, Kilminchy, Dublin Road, Portlaoise, Co. Laois, R32 CPA4

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Qualifications:

2-3 years’ HGV mechanic experience required. Mechanic Certification preferred but not essential. There are no minimum academic requirements. Further training will be provided on-the-job as required.

- To fit, install, maintain, service and repair engines and the mechanical and related equipment of heavy goods vehicles.

- To detect and diagnose faults in engines and parts

- To fit, examine, test and service heavy goods vehicles and engines

- To replace engine components or complete engines

- To fit, examine, adjust, dismantle, rebuild and replace defective parts of HGVs

- Essential knowledge includes vehicle diagnostics, and repairing & diagnosing ABS/EBS brake systems

- Essential skills include diagnosis and repair of trucks, trailers and vans

- The candidate must have experience in installing and adjusting motors, brakes and steering

- The candidate must have experience in installing, adjusting and servicing mechatronics components of HGVs

- The candidate must have knowledge and experience of performing scheduled maintenance services such as oil changes and engine tune-ups, to achieve smooth running of vehicles and compliance with pollution regulations

- The candidate must be able to reassemble engines and parts after repairs

- A mechanic qualification or certificate is a bonus but is not mandatory

- 2-3 years’ of relevant experience as a HGV Mechanic is required

Annual remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: Conor Phelan Construction Limited, 4A Shandon Street, Dungarvan, Co Waterford, X35 NR40.

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Qualifications:

2-3 years’ HGV mechanic experience required. Mechanic Certification preferred but not essential. There are no minimum academic requirements. Further training will be provided on-the-job as required.

- To fit, install, maintain, service and repair engines and the mechanical and related equipment of heavy goods vehicles.

- To detect and diagnose faults in engines and parts

- To fit, examine, test and service heavy goods vehicles and engines

- To replace engine components or complete engines

- To fit, examine, adjust, dismantle, rebuild and replace defective parts of HGVs

- Essential knowledge includes vehicle diagnostics, and repairing & diagnosing ABS/EBS brake systems

- Essential skills include diagnosis and repair of trucks, trailers and vans

- The candidate must have experience in installing and adjusting motors, brakes and steering

- The candidate must have experience in installing, adjusting and servicing mechatronics components of HGVs

- The candidate must have knowledge and experience of performing scheduled maintenance services such as oil changes and engine tune-ups, to achieve smooth running of vehicles and compliance with pollution regulations

- The candidate must be able to reassemble engines and parts after repairs

- A mechanic qualification or certificate is a bonus but is not mandatory

- 2-3 years’ of relevant experience as a HGV Mechanic is required

 

Annual remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: McGrath's Limestone (Cong) Limited, Cregaree, Cong, Co. Mayo, F31 W425.

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Our client, Kilcarrig Quarries Ireland Limited, based in in Bagenalstown, Co. Carlow, is currently seeking HGV Mechanics for immediate start at their facilities in Bagenalstown, Co. Carlow.

Qualifications:

2-3 years’ HGV mechanic experience required. Mechanic Certification preferred but not essential. There are no minimum academic requirements. Further training will be provided on-the-job as required.

General Duties / Responsibilities / Experience:

- To fit, install, maintain, service and repair engines and the mechanical and related equipment of heavy goods vehicles.

- To detect and diagnose faults in engines and parts

- To fit, examine, test and service heavy goods vehicles and engines

- To replace engine components or complete engines

- To fit, examine, adjust, dismantle, rebuild and replace defective parts of HGVs

- Essential knowledge includes vehicle diagnostics, and repairing & diagnosing ABS/EBS brake systems

- Essential skills include diagnosis and repair of trucks, trailers and vans

- The candidate must have experience in installing and adjusting motors, brakes and steering

- The candidate must have experience in installing, adjusting and servicing mechatronics components of HGVs

- The candidate must have knowledge and experience of performing scheduled maintenance services such as oil changes and engine tune-ups, to achieve smooth running of vehicles and compliance with pollution regulations

- The candidate must be able to reassemble engines and parts after repairs

- A mechanic qualification or certificate is a bonus but is not mandatory

- 2-3 years’ of relevant experience as a HGV Mechanic is required

Annual remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: Kilcarrig Quarries Ireland Limited, Kilcarrig, Bagenalstown, Co. Carlow, R21AP52.

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Our client, Kilcarrig Quarries Ireland Limited, based in in Bagenalstown, Co. Carlow, is currently seeking HGV Mechanics for immediate start at their facilities in Bagenalstown, Co. Carlow.

Qualifications:

2-3 years’ HGV mechanic experience required. Mechanic Certification preferred but not essential. There are no minimum academic requirements. Further training will be provided on-the-job as required.

General Duties / Responsibilities / Experience:

- To fit, install, maintain, service and repair engines and the mechanical and related equipment of heavy goods vehicles.

- To detect and diagnose faults in engines and parts

- To fit, examine, test and service heavy goods vehicles and engines

- To replace engine components or complete engines

- To fit, examine, adjust, dismantle, rebuild and replace defective parts of HGVs

- Essential knowledge includes vehicle diagnostics, and repairing & diagnosing ABS/EBS brake systems

- Essential skills include diagnosis and repair of trucks, trailers and vans

- The candidate must have experience in installing and adjusting motors, brakes and steering

- The candidate must have experience in installing, adjusting and servicing mechatronics components of HGVs

- The candidate must have knowledge and experience of performing scheduled maintenance services such as oil changes and engine tune-ups, to achieve smooth running of vehicles and compliance with pollution regulations

- The candidate must be able to reassemble engines and parts after repairs

- A mechanic qualification or certificate is a bonus but is not mandatory

- 2-3 years’ of relevant experience as a HGV Mechanic is required

Annual remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: Kilcarrig Quarries Ireland Limited, Kilcarrig, Bagenalstown, Co. Carlow, R21AP52.

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Qualifications:

2-3 years’ HGV mechanic experience required. Mechanic Certification preferred but not essential. There are no minimum academic requirements. Further training will be provided on-the-job as required.

General Duties / Responsibilities / Experience:

- To fit, install, maintain, service and repair engines and the mechanical and related equipment of heavy goods vehicles.

- To detect and diagnose faults in engines and parts

- To fit, examine, test and service heavy goods vehicles and engines

- To replace engine components or complete engines

- To fit, examine, adjust, dismantle, rebuild and replace defective parts of HGVs

- Essential knowledge includes vehicle diagnostics, and repairing & diagnosing ABS/EBS brake systems

- Essential skills include diagnosis and repair of trucks, trailers and vans

- The candidate must have experience in installing and adjusting motors, brakes and steering

- The candidate must have experience in installing, adjusting and servicing mechatronics components of HGVs

- The candidate must have knowledge and experience of performing scheduled maintenance services such as oil changes and engine tune-ups, to achieve smooth running of vehicles and compliance with pollution regulations

- The candidate must be able to reassemble engines and parts after repairs

- A mechanic qualification or certificate is a bonus but is not mandatory

- 2-3 years’ of relevant experience as a HGV Mechanic is required

 

Annual remuneration: €36,605.00; Pay rate €18.05 per hour

Work Locations – Crewit Resourcing Limited at:

- 2004 Orchard Avenue, Citywest Business Campus, Co. Dublin, D24 YK28

- Killamuck, Abbeyleix, Co. Laois, R32 YD86

 

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Qualifications:

2-3 years of HGV mechanic experience required. Mechanic Certification preferred but not essential. There are no minimum academic requirements. Further training will be provided on-the-job as required.

General Duties / Responsibilities/ Experience:

- To fit, install, maintain, service and repair engines and the mechanical and related equipment of heavy goods vehicles.

- To detect and diagnose faults in engines and parts

- To fit, examine, test and service heavy goods vehicles and engines

- To replace engine components or complete engines

- To fit, examine, adjust, dismantle, rebuild and replace defective parts of HGVs

- Essential knowledge includes vehicle diagnostics, and repairing & diagnosing ABS/EBS brake systems

- Essential skills include diagnosis and repair of trucks, trailers and vans

- The candidate must have experience in installing and adjusting motors, brakes and steering

- The candidate must have experience in installing, adjusting and servicing mechatronics components of HGVs

- The candidate must have knowledge and experience of performing scheduled maintenance services such as oil changes and engine tune-ups, to achieve smooth running of vehicles and compliance with pollution regulations

- The candidate must be able to reassemble engines and parts after repairs

- A mechanic qualification or certificate is a bonus but is not mandatory

- 2-3 years’ of relevant experience as a HGV Mechanic is required

Annual Remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: Portlaoise Logistics Limited, Kilminchy, Dublin Road, Portlaoise, Co. Laois, R32 CPA4

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Qualifications:

2-3 years’ HGV mechanic experience required. Mechanic Certification preferred but not essential. There are no minimum academic requirements. Further training will be provided on-the-job as required.

General Duties / Responsibilities / Experience:

- To fit, install, maintain, service and repair engines and the mechanical and related equipment of heavy goods vehicles.

- To detect and diagnose faults in engines and parts

- To fit, examine, test and service heavy goods vehicles and engines

- To replace engine components or complete engines

- To fit, examine, adjust, dismantle, rebuild and replace defective parts of HGVs

- Essential knowledge includes vehicle diagnostics, and repairing & diagnosing ABS/EBS brake systems

- Essential skills include diagnosis and repair of trucks, trailers and vans

- The candidate must have experience in installing and adjusting motors, brakes and steering

- The candidate must have experience in installing, adjusting and servicing mechatronics components of HGVs

- The candidate must have knowledge and experience of performing scheduled maintenance services such as oil changes and engine tune-ups, to achieve smooth running of vehicles and compliance with pollution regulations

- The candidate must be able to reassemble engines and parts after repairs

- A mechanic qualification or certificate is a bonus but is not mandatory

- 2-3 years’ of relevant experience as a HGV Mechanic is required

Annual remuneration: €36,605.00; Pay rate €18.05 per hour

Work Locations- Plazamont Limited t/a Dan Morrissey and Company at:

- Dan Morrissey Business Park, Bennekerry, Co. Carlow

- Quarry, Clonmelsh, Co. Carlow, R93 WP83

- Ballyburn Upper, Castledermot, Co. Kildare

- Charles Stewart Parnell Quarry, Balleese Wood, Rathdrum, Co. Wicklow

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Duties & Responsibilities

- To be responsible for the inspection, maintenance, and repair of light commercial vehicles (primarily refrigerated vans) to ensure maximum operational efficiency, compliance with road safety standards, and minimal downtime.

- To perform diagnostic tests on light commercial vehicles, completing repairs, and ensuring vehicles are safe and adhere to regulatory standards.

- Diagnose mechanical, electrical, and refrigeration issues on LCVs using diagnostic tools and software.

- Carry out routine servicing, inspections, and preventative maintenance.

- Repair and replace parts including engines, brakes, suspension, transmission, and refrigeration units.

- Perform pre-NCT checks and ensure all vehicles meet required safety and compliance standards.

- Maintain accurate records of all maintenance and repairs carried out.

- Respond to breakdowns and perform roadside assistance when required.

- Collaborate with the Fleet Manager to schedule maintenance and ensure minimal disruption to operations.

- Ensure all work is performed in line with company health and safety procedures and environmental regulations.

- Ensure that all repairs and maintenance work meet or exceed regulatory standards

Requirements & Experience

- Candidate must be competent to carry out all duties listed above

- Minimum 3 years of experience working on light commercial vehicles as a mechanic

- Mechanic qualification is an advantage but is not required

- Experience in carrying out routine servicing and preventive & reactive maintenance on commercial fleet vehicles is required

- Strong diagnostic and problem-solving skills.

- Ability to check and assess vehicles for road safety requirements and testing

- Ability to work independently and as part of a team.

- Flexibility for occasional overtime and on-call duties.

- Experience with vehicle diagnostic software (e.g. TEXA, Snap-on).

- Familiarity with health & safety protocols in a workshop environment.

Annual remuneration: €36,605.00; Pay rate €18.05 per hour

Work Locations – Crewit Resourcing Limited at:

- 2004 Orchard Avenue, Citywest Business Campus, Co. Dublin, D24 YK28

- Killamuck, Abbeyleix, Co. Laois, R32 YD86

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Duties & Responsibilities

- To be responsible for the inspection, maintenance, and repair of light commercial vehicles to ensure maximum operational efficiency, compliance with road safety standards, and minimal downtime.

- To perform diagnostic tests on light commercial vehicles, completing repairs, and ensuring vehicles are safe and adhere to regulatory standards.

- Diagnose mechanical and electrical issues on LCVs using diagnostic tools and software.

- Carry out routine servicing, inspections, and preventative maintenance.

- Repair and replace parts including engines, brakes, suspension, and transmission

- Perform pre-NCT checks and ensure all vehicles meet required safety and compliance standards.

- Maintain accurate records of all maintenance and repairs carried out.

- Respond to breakdowns and perform roadside assistance when required.

- Collaborate with the Fleet Manager to schedule maintenance and ensure minimal disruption to operations.

- Ensure all work is performed in line with company health and safety procedures and environmental regulations.

- Ensure that all repairs and maintenance work meet or exceed regulatory standards

Requirements & Experience

- Candidate must be competent to carry out all duties listed above

- Minimum 3 years of experience working on light commercial vehicles as a mechanic

- Mechanic qualification is an advantage but is not required

- Experience in carrying out routine servicing and preventive & reactive maintenance on commercial fleet vehicles is required

- Strong diagnostic and problem-solving skills.

- Ability to check and assess vehicles for road safety requirements and testing

- Ability to work independently and as part of a team.

- Flexibility for occasional overtime and on-call duties.

- Experience with vehicle diagnostic software (e.g. TEXA, Snap-on).

- Familiarity with health & safety protocols in a workshop environment.

 

Annual Remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: Marcin & Piotr Motors Santry Limited t/a MP Motors, Old Airport Road, Santry, Dublin 9, Co. Dublin

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Employer: Adare Machinery

Location: Fanningstown Business Park, Patrickswell, Co. Limerick, Eircode: V94 Y4C0

Contract: Full-time, Permanent

Hours: 39 hours per week

Salary: €36,605 per annum

Vacancies: 1

We are seeking an experienced Machinery Painter to prepare and paint heavy construction and agricultural equipment (Bobcat and other brands) to a high professional standard.

Key Responsibilities:

Surface preparation, sanding, masking and priming of machinery.

Spray painting of primers and topcoats using professional equipment.

Quality control and finishing of machines for delivery or resale.

Maintaining a clean and safe workshop environment.

Key Responsibilities & Duties

- To carry out servicing, diagnostics and repair work on a wide variety of vehicles and small plant equipment used within our hire fleet

- To maintain the safety, performance and reliability of machinery and supporting smooth operations across sites

- Perform routine servicing and maintenance on diesel and petrol engines, small plant equipment, and company vehicles.

- Diagnose and repair faults in engines, hydraulics, transmissions, brakes, and electrical systems.

- Conduct pre-hire inspections and post-hire checks to ensure equipment is in full working order.

- Maintain service records and complete job cards accurately and on time.

- Liaise with the Workshop Manager and other team members to prioritise repair work and minimise downtime.

- Ensure all work is carried out in compliance with health and safety standards.

- Identify and report any issues that may affect equipment safety or customer satisfaction.

- Occasionally assist with on-site breakdowns or emergency repairs when required.

Key Requirements – Skills, Qualifications and Experience

- Minimum of 3 years of experience as a Motor Mechanic in a previous role. Experience in a plant hire company is a plus

- No formal qualifications are required, but a certification relevant to the role is a plus

- Ability to perform all job responsibilities listed above

- Proven experience working with plant equipment, commercial vehicles, or agricultural machinery

- Strong mechanical, electrical, and diagnostic skills.

- Ability to work independently and as part of a team.

- A proactive and reliable attitude with attention to detail.

- Experience in a plant hire or construction environment.

- Familiarity with hydraulic systems and heavy-duty components.

- Basic welding or fabrication skills.

Annual remuneration: €36,605.00 per annum; Pay rate €18.05 per hour

Work Locations - Castleblaney Plant Hire t/a Monaghan Hire at:

- Monaghan Road, Castleblayney, Co. Monaghan, A75 Y759

- Dublin Road, Monaghan, Co. Monaghan, H18 HN23

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Qualifications:

2-3 years’ Plant Mechanic experience required. Mechanic Certification preferred but not essential. There are no minimum academic requirements. Further training will be provided on-the-job as required.

General Duties / Responsibilities / Experience:

- To maintain, troubleshoot, repair, and service machinery and equipment used in quarries, quarrying and related activities

- To ensure that all plant machinery is operating efficiently and safely, to minimize downtime, and to support the overall productivity of the plant

- To perform regular maintenance checks on plant machinery, including mixers, conveyors, pumps, crushers, and batching systems.

- To conduct preventative maintenance tasks to extend the life of equipment and minimize breakdowns.

- To lubricate machinery, replace worn parts, and ensure all components are in good working condition.

- To identify mechanical, electrical, and hydraulic issues in plant equipment and diagnose problems accurately.

- To repair or replace faulty parts, ensuring that all machinery is returned to full operational capacity in a timely manner.

- To perform both scheduled and emergency repairs to minimize downtime.

- To ensure all work is conducted in compliance with health, safety, and environmental regulations.

- To maintain accurate records of maintenance, repairs, and inspections performed on plant equipment.

- Essential knowledge includes mechanical, electrical, hydraulic, and pneumatic systems, as well as the ability to diagnose and fix issues promptly to ensure smooth plant operations

- Essential knowledge includes strong mechanical, electrical, and hydraulic knowledge, ability to read technical drawings, schematics, and manuals, and excellent trouble-shooting and problem solving skills

- Essential skills include application of relevant health & safety and environmental legislation, performance of system checks and adjustments on machinery, and monitoring of inventory supply for required equipment

- Candidates must be competent to assist in the installation and commissioning of new equipment or upgrades

- Candidates must be competent to monitor stock levels of spare parts, tools, and equipment needed for maintenance and order parts and supplies as needed

- A mechanic qualification or certificate is a bonus but is not mandatory

- 2-3 years’ of proven relevant experience as a Plant Mechanic is required. Experience in the quarry industry is a plus

Annual remuneration: €36,605.00; Pay rate €18.05 per hour

Work Locations:

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Work Location: Hire Depot Construction Services Limited, Axis Business Park, Tullamore, Co. Offaly, R35 WK83.

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Qualifications:

2-3 years’ Plant Mechanic experience required. Mechanic Certification preferred but not essential. There are no minimum academic requirements. Further training will be provided on-the-job as required.

General Duties / Responsibilities / Experience:

- To maintain, troubleshoot, repair, and service machinery and equipment used in plant, construction and related activities

- To ensure that all plant machinery is operating efficiently and safely, to minimize downtime, and to support the overall productivity of the plant

- To perform regular maintenance checks on plant machinery, including mixers, conveyors, pumps, crushers, and batching systems.

- To conduct preventative maintenance tasks to extend the life of equipment and minimize breakdowns.

- To lubricate machinery, replace worn parts, and ensure all components are in good working condition.

- To identify mechanical, electrical, and hydraulic issues in plant equipment and diagnose problems accurately.

- To repair or replace faulty parts, ensuring that all machinery is returned to full operational capacity in a timely manner.

- To perform both scheduled and emergency repairs to minimize downtime.

- To ensure all work is conducted in compliance with health, safety, and environmental regulations.

- To maintain accurate records of maintenance, repairs, and inspections performed on plant equipment.

- Essential knowledge includes mechanical, electrical, hydraulic, and pneumatic systems, as well as the ability to diagnose and fix issues promptly to ensure smooth plant operations

- Essential knowledge includes strong mechanical, electrical, and hydraulic knowledge, ability to read technical drawings, schematics, and manuals, and excellent trouble-shooting and problem solving skills

- Essential skills include application of relevant health & safety and environmental legislation, performance of system checks and adjustments on machinery, and monitoring of inventory supply for required equipment

- Candidates must be competent to assist in the installation and commissioning of new equipment or upgrades

- Candidates must be competent to monitor stock levels of spare parts, tools, and equipment needed for maintenance and order parts and supplies as needed

- A mechanic qualification or certificate is a bonus but is not mandatory

- 2-3 years’ of proven relevant experience as a Plant Mechanic is required.

Annual remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: Michael F. Quirke & Sons Unlimited Company, Rangue, Killorglin, Co. Kerry, V93 XA31.

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Qualifications:

2-3 years’ Plant Mechanic experience required. Mechanic Certification preferred but not essential. There are no minimum academic requirements. Further training will be provided on-the-job as required.

General Duties / Responsibilities / Experience:

- To maintain, troubleshoot, repair, and service machinery and equipment used in quarries, quarrying and related activities

- To ensure that all plant machinery is operating efficiently and safely, to minimize downtime, and to support the overall productivity of the plant

- To perform regular maintenance checks on plant machinery, including mixers, conveyors, pumps, crushers, and batching systems.

- To conduct preventative maintenance tasks to extend the life of equipment and minimize breakdowns.

- To lubricate machinery, replace worn parts, and ensure all components are in good working condition.

- To identify mechanical, electrical, and hydraulic issues in plant equipment and diagnose problems accurately.

- To repair or replace faulty parts, ensuring that all machinery is returned to full operational capacity in a timely manner.

- To perform both scheduled and emergency repairs to minimize downtime.

- To ensure all work is conducted in compliance with health, safety, and environmental regulations.

- To maintain accurate records of maintenance, repairs, and inspections performed on plant equipment.

- Essential knowledge includes mechanical, electrical, hydraulic, and pneumatic systems, as well as the ability to diagnose and fix issues promptly to ensure smooth plant operations

- Essential knowledge includes strong mechanical, electrical, and hydraulic knowledge, ability to read technical drawings, schematics, and manuals, and excellent trouble-shooting and problem solving skills

- Essential skills include application of relevant health & safety and environmental legislation, performance of system checks and adjustments on machinery, and monitoring of inventory supply for required equipment

- Candidates must be competent to assist in the installation and commissioning of new equipment or upgrades

- Candidates must be competent to monitor stock levels of spare parts, tools, and equipment needed for maintenance and order parts and supplies as needed

- A mechanic qualification or certificate is a bonus but is not mandatory

- 2-3 years’ of proven relevant experience as a Plant Mechanic is required. Experience in the quarry industry is a plus

 

Annual remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: Hire Depot Construction Services Limited, Axis Business Park, Tullamore, Co. Offaly, R35 WK83

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Our client, Kilcarrig Quarries Ireland Limited, based in Bagenalstown, Co. Carlow, is currently seeking Plant Mechanics for immediate start at their facility in Bagenalstown, Co. Carlow.

Qualifications:

2-3 years’ Plant Mechanic experience required. Mechanic Certification preferred but not essential. There are no minimum academic requirements. Further training will be provided on-the-job as required.

- To maintain, troubleshoot, repair, and service machinery and equipment used in quarries, quarrying and related activities

- To ensure that all plant machinery is operating efficiently and safely, to minimize downtime, and to support the overall productivity of the plant

- To perform regular maintenance checks on plant machinery, including mixers, conveyors, pumps, crushers, and batching systems.

- To conduct preventative maintenance tasks to extend the life of equipment and minimize breakdowns.

- To lubricate machinery, replace worn parts, and ensure all components are in good working condition.

- To identify mechanical, electrical, and hydraulic issues in plant equipment and diagnose problems accurately.

- To repair or replace faulty parts, ensuring that all machinery is returned to full operational capacity in a timely manner.

- To perform both scheduled and emergency repairs to minimize downtime.

- To ensure all work is conducted in compliance with health, safety, and environmental regulations.

- To maintain accurate records of maintenance, repairs, and inspections performed on plant equipment.

- Essential knowledge includes mechanical, electrical, hydraulic, and pneumatic systems, as well as the ability to diagnose and fix issues promptly to ensure smooth plant operations

- Essential knowledge includes strong mechanical, electrical, and hydraulic knowledge, ability to read technical drawings, schematics, and manuals, and excellent trouble-shooting and problem solving skills

- Essential skills include application of relevant health & safety and environmental legislation, performance of system checks and adjustments on machinery, and monitoring of inventory supply for required equipment

- Candidates must be competent to assist in the installation and commissioning of new equipment or upgrades

- Candidates must be competent to monitor stock levels of spare parts, tools, and equipment needed for maintenance and order parts and supplies as needed

- A mechanic qualification or certificate is a bonus but is not mandatory

- 2-3 years’ of proven relevant experience as a Plant Mechanic is required. Experience in the quarry industry is a plus

Work Location: Kilcarrig Quarries Ireland Limited, Kilcarrig Bagenalstown, Co. Carlow, R21 AP52.

Number of hours work each week: 39

Our client, Kilcarrig Quarries Ireland Limited, based in Bagenalstown, Co. Carlow, is currently seeking Plant Mechanics for immediate start at their facility in Bagenalstown, Co. Carlow.

Qualifications:

2-3 years’ Plant Mechanic experience required. Mechanic Certification preferred but not essential. There are no minimum academic requirements. Further training will be provided on-the-job as required.

- To maintain, troubleshoot, repair, and service machinery and equipment used in quarries, quarrying and related activities

- To ensure that all plant machinery is operating efficiently and safely, to minimize downtime, and to support the overall productivity of the plant

- To perform regular maintenance checks on plant machinery, including mixers, conveyors, pumps, crushers, and batching systems.

- To conduct preventative maintenance tasks to extend the life of equipment and minimize breakdowns.

- To lubricate machinery, replace worn parts, and ensure all components are in good working condition.

- To identify mechanical, electrical, and hydraulic issues in plant equipment and diagnose problems accurately.

- To repair or replace faulty parts, ensuring that all machinery is returned to full operational capacity in a timely manner.

- To perform both scheduled and emergency repairs to minimize downtime.

- To ensure all work is conducted in compliance with health, safety, and environmental regulations.

- To maintain accurate records of maintenance, repairs, and inspections performed on plant equipment.

- Essential knowledge includes mechanical, electrical, hydraulic, and pneumatic systems, as well as the ability to diagnose and fix issues promptly to ensure smooth plant operations

- Essential knowledge includes strong mechanical, electrical, and hydraulic knowledge, ability to read technical drawings, schematics, and manuals, and excellent trouble-shooting and problem solving skills

- Essential skills include application of relevant health & safety and environmental legislation, performance of system checks and adjustments on machinery, and monitoring of inventory supply for required equipment

- Candidates must be competent to assist in the installation and commissioning of new equipment or upgrades

- Candidates must be competent to monitor stock levels of spare parts, tools, and equipment needed for maintenance and order parts and supplies as needed

- A mechanic qualification or certificate is a bonus but is not mandatory

- 2-3 years’ of proven relevant experience as a Plant Mechanic is required. Experience in the quarry industry is a plus

Work Location: Kilcarrig Quarries Ireland Limited, Kilcarrig Bagenalstown, Co. Carlow, R21 AP52.

Number of hours work each week: 39

- To maintain, troubleshoot, repair, and service machinery and equipment used in quarry activities

- To ensure that all quarry machinery is operating efficiently and safely, to minimize downtime, and to support the overall productivity of the quarry

- To perform regular maintenance checks on quarry machinery, including mixers, conveyors, pumps, crushers, and batching systems.

- To conduct preventative maintenance tasks to extend the life of equipment and minimize breakdowns.

- To lubricate machinery, replace worn parts, and ensure all components are in good working condition.

- To identify mechanical, electrical, and hydraulic issues in quarry equipment and diagnose problems accurately.

- To repair or replace faulty parts, ensuring that all machinery is returned to full operational capacity in a timely manner.

- To perform both scheduled and emergency repairs to minimize downtime.

- To ensure all work is conducted in compliance with health, safety, and environmental regulations.

- To maintain accurate records of maintenance, repairs, and inspections performed on quarry equipment.

 

 

Requirements:

- Candidates must be competent to perform all job duties listed above

- A mechanic qualification or certificate is a bonus but is not mandatory

- 2-3 years’ of proven relevant experience as a Plant Mechanic is required.

- Experience working as a Mechanic in a quarry with heavy machinery is a plus

- Essential knowledge includes mechanical, electrical, hydraulic, and pneumatic systems, as well as the ability to diagnose and fix issues promptly to ensure smooth plant operations

- Essential knowledge includes strong mechanical, electrical, and hydraulic knowledge, ability to read technical drawings, schematics, and manuals, and excellent trouble-shooting and problem solving skills

- Essential skills include application of relevant health & safety and environmental legislation, performance of system checks and adjustments on machinery, and monitoring of inventory supply for required equipment

- Candidates must be competent to assist in the installation and commissioning of new equipment or upgrades

- Candidates must be competent to monitor stock levels of spare parts, tools, and equipment needed for maintenance and order parts and supplies as needed

- Candidates must have experience in preventive and reactive maintenance of quarry/plant equipment.

 

 

Annual remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: McGrath's Limestone (Cong) Limited, Cregaree, Cong, Co. Mayo, F31 W425.

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Our client, Assured Personnel Limited, based in Swords, Co. Dublin, is currently seeking Vehicle Paint Technicians for immediate start at their facility in Swords, Co. Dublin.

Key Duties & Responsibilities

- To prepare vehicles and vehicle components for painting by cleaning, sanding, masking, filling, and priming surfaces.

- To mix and match paint colours according to manufacturer specifications and repair requirements.

- To apply primers, base coats, clear coats, and specialised automotive coatings using spray-painting equipment.

- To paint repaired vehicle panels and full vehicle bodies to manufacturer and industry standards.

- To inspect completed paintwork for defects, including runs, sags, contamination, colour mismatch, or unpainted areas.

- To carry out polishing, finishing, and rectification work where required.

- To use spray guns, paint mixing systems, sanding equipment, and other bodyshop tools safely and effectively.

- To maintain spray booths, painting equipment, and associated tools in a clean and serviceable condition.

- To comply with all health, safety, and environmental regulations relating to paints, solvents, thinners, and hazardous materials.

- To cooperate with panel beaters, mechanics, and other bodyshop personnel to ensure efficient completion of vehicle repairs.

- To have experience in accident repair centres, vehicle refurbishment facilities, dealerships, or commercial bodyshops is highly desirable.

 

  

- Minimum 2 years' experience as a Vehicle Spray Painter, Automotive Paint Technician, or similar role within a bodyshop environment.

- A qualification in automotive refinishing is advantageous but not essential.

- Strong knowledge of automotive paint systems, colour matching techniques, and vehicle refinishing processes.

- Ability to work independently and as part of a team in a fast-paced environment.

- Strong attention to detail and commitment to quality workmanship.

- Good understanding of health, safety, and environmental regulations applicable to automotive paint operations.

- Competent in paint preparation, masking, sanding, colour matching, spray-paint application, polishing, and quality inspection.

- Experience maintaining painting equipment and handling hazardous materials safely.

Work Location: Assured Personnel Limited, Airside Motor Park, Airside Retail Park, Swords, Co. Dublin, K67 TE83.

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Our client, Assured Personnel Limited, based in Swords, Co. Dublin, is currently seeking Vehicle Paint Technicians for immediate start at their facility in Swords, Co. Dublin.

Key Duties & Responsibilities

- To prepare vehicles and vehicle components for painting by cleaning, sanding, masking, filling, and priming surfaces.

- To mix and match paint colours according to manufacturer specifications and repair requirements.

- To apply primers, base coats, clear coats, and specialised automotive coatings using spray-painting equipment.

- To paint repaired vehicle panels and full vehicle bodies to manufacturer and industry standards.

- To inspect completed paintwork for defects, including runs, sags, contamination, colour mismatch, or unpainted areas.

- To carry out polishing, finishing, and rectification work where required.

- To use spray guns, paint mixing systems, sanding equipment, and other bodyshop tools safely and effectively.

- To maintain spray booths, painting equipment, and associated tools in a clean and serviceable condition.

- To comply with all health, safety, and environmental regulations relating to paints, solvents, thinners, and hazardous materials.

- To cooperate with panel beaters, mechanics, and other bodyshop personnel to ensure efficient completion of vehicle repairs.

- To have experience in accident repair centres, vehicle refurbishment facilities, dealerships, or commercial bodyshops is highly desirable.

 

  

- Minimum 2 years' experience as a Vehicle Spray Painter, Automotive Paint Technician, or similar role within a bodyshop environment.

- A qualification in automotive refinishing is advantageous but not essential.

- Strong knowledge of automotive paint systems, colour matching techniques, and vehicle refinishing processes.

- Ability to work independently and as part of a team in a fast-paced environment.

- Strong attention to detail and commitment to quality workmanship.

- Good understanding of health, safety, and environmental regulations applicable to automotive paint operations.

- Competent in paint preparation, masking, sanding, colour matching, spray-paint application, polishing, and quality inspection.

- Experience maintaining painting equipment and handling hazardous materials safely.

Work Location: Assured Personnel Limited, Airside Motor Park, Airside Retail Park, Swords, Co. Dublin, K67 TE83.

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Our client, Assured Personnel Limited, based in Swords, Co. Dublin, is currently seeking Vehicle Paint Technicians for immediate start at their facility in Swords, Co. Dublin.

Key Duties & Responsibilities

- To prepare vehicles and vehicle components for painting by cleaning, sanding, masking, filling, and priming surfaces.

- To mix and match paint colours according to manufacturer specifications and repair requirements.

- To apply primers, base coats, clear coats, and specialised automotive coatings using spray-painting equipment.

- To paint repaired vehicle panels and full vehicle bodies to manufacturer and industry standards.

- To inspect completed paintwork for defects, including runs, sags, contamination, colour mismatch, or unpainted areas.

- To carry out polishing, finishing, and rectification work where required.

- To use spray guns, paint mixing systems, sanding equipment, and other bodyshop tools safely and effectively.

- To maintain spray booths, painting equipment, and associated tools in a clean and serviceable condition.

- To comply with all health, safety, and environmental regulations relating to paints, solvents, thinners, and hazardous materials.

- To cooperate with panel beaters, mechanics, and other bodyshop personnel to ensure efficient completion of vehicle repairs.

- To have experience in accident repair centres, vehicle refurbishment facilities, dealerships, or commercial bodyshops is highly desirable.

 

  

- Minimum 2 years' experience as a Vehicle Spray Painter, Automotive Paint Technician, or similar role within a bodyshop environment.

- A qualification in automotive refinishing is advantageous but not essential.

- Strong knowledge of automotive paint systems, colour matching techniques, and vehicle refinishing processes.

- Ability to work independently and as part of a team in a fast-paced environment.

- Strong attention to detail and commitment to quality workmanship.

- Good understanding of health, safety, and environmental regulations applicable to automotive paint operations.

- Competent in paint preparation, masking, sanding, colour matching, spray-paint application, polishing, and quality inspection.

- Experience maintaining painting equipment and handling hazardous materials safely.

Work Location: Assured Personnel Limited, Airside Motor Park, Airside Retail Park, Swords, Co. Dublin, K67 TE83.

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Our client, Pudaxa Limited based in Donabate, Co. Dublin, is currently seeking Vehicle Paint Technicians for immediate start at their facility in Turvey Lane, Donabate, Co. Dublin.

Key Duties & Responsibilities

- To prepare vehicles and vehicle components for painting by cleaning, sanding, masking, filling, and priming surfaces.

- To mix and match paint colours according to manufacturer specifications and repair requirements.

- To apply primers, base coats, clear coats, and specialised automotive coatings using spray-painting equipment.

- To paint repaired vehicle panels and full vehicle bodies to manufacturer and industry standards.

- To inspect completed paintwork for defects, including runs, sags, contamination, colour mismatch, or unpainted areas.

- To carry out polishing, finishing, and rectification work where required.

- To use spray guns, paint mixing systems, sanding equipment, and other bodyshop tools safely and effectively.

- To maintain spray booths, painting equipment, and associated tools in a clean and serviceable condition.

- To comply with all health, safety, and environmental regulations relating to paints, solvents, thinners, and hazardous materials.

- To cooperate with panel beaters, mechanics, and other bodyshop personnel to ensure efficient completion of vehicle repairs.

- To have experience in accident repair centres, vehicle refurbishment facilities, dealerships, or commercial bodyshops is highly desirable.

Requirements – Skills & Experience

- Minimum 2 years' experience as a Vehicle Spray Painter, Automotive Paint Technician, or similar role within a bodyshop environment.

- A qualification in automotive refinishing is advantageous but not essential.

- Strong knowledge of automotive paint systems, colour matching techniques, and vehicle refinishing processes.

- Ability to work independently and as part of a team in a fast-paced environment.

- Strong attention to detail and commitment to quality workmanship.

- Good understanding of health, safety, and environmental regulations applicable to automotive paint operations.

- Competent in paint preparation, masking, sanding, colour matching, spray-paint application, polishing, and quality inspection.

- Experience maintaining painting equipment and handling hazardous materials safely.

Annual Remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: Pudaxa Limited, Unit 12 Shannon Valley Centre, Turvey Lane, Donabate, Co. Dublin, K36 P589

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Our client, Portlaoise Logistics Limited, based in Portlaoise, Co. Laois, is currently seeking Vehicle Paint Technicians for immediate start at their facility in Portlaoise, Co. Laois.

- To prepare vehicles and vehicle components for painting by cleaning, sanding, masking, filling, and priming surfaces.

- To mix and match paint colours according to manufacturer specifications and repair requirements.

- To apply primers, base coats, clear coats, and specialised automotive coatings using spray-painting equipment.

- To paint repaired vehicle panels and full vehicle bodies to manufacturer and industry standards.

- To inspect completed paintwork for defects, including runs, sags, contamination, colour mismatch, or unpainted areas.

- To carry out polishing, finishing, and rectification work where required.

- To use spray guns, paint mixing systems, sanding equipment, and other bodyshop tools safely and effectively.

- To maintain spray booths, painting equipment, and associated tools in a clean and serviceable condition.

- To comply with all health, safety, and environmental regulations relating to paints, solvents, thinners, and hazardous materials.

- To cooperate with panel beaters, mechanics, and other bodyshop personnel to ensure efficient completion of vehicle repairs.

- To have experience in accident repair centres, vehicle refurbishment facilities, dealerships, or commercial bodyshops is highly desirable.

 

 

 

- Minimum 2 years' experience as a Vehicle Spray Painter, Automotive Paint Technician, or similar role within a bodyshop environment.

- A qualification in automotive refinishing is advantageous but not essential.

- Strong knowledge of automotive paint systems, colour matching techniques, and vehicle refinishing processes.

- Ability to work independently and as part of a team in a fast-paced environment.

- Strong attention to detail and commitment to quality workmanship.

- Good understanding of health, safety, and environmental regulations applicable to automotive paint operations.

- Competent in paint preparation, masking, sanding, colour matching, spray-paint application, polishing, and quality inspection.

- Experience maintaining painting equipment and handling hazardous materials safely.

 

 

Annual Remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: Portlaoise Logistics Limited, Kilminchy, Dublin Road, Portlaoise, Co. Laois, R32 CPA4.

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.