Qualifications:

Minimum 3 years of previous Carpentry/Joinery experience required. Carpentry/Joinery Certification/Apprenticeship/Trade preferred but not essential. There are no minimum academic requirements. Further training will be provided on-the-job as required.

General Duties / Responsibilities / Experience:

- To cut, shape, assemble, erect, maintain and repair various types of wood structures and fittings

- To cut, shape and assemble wooden elements for the construction of buildings & wooden installations

- To make, alter & repair structural and other woodwork at a workbench or on site

- To construct, erect and install framed wooden structures on site

- To fit, assemble, and alter internal and external fixtures of buildings, such as walls, doors, door & window frames, facings and panelling

- To build and install bespoke wood solutions for clients in various sectors

- Essential knowledge includes types of wood, wood cuts, and woodworking tools

- Further essential knowledge includes use of power tools, use of measurement instruments, and use of sawing equipment

- Essential skills include application of wood finishes, cleaning of wood surface, and creation of smooth wood surface

- Further essential skills include creating wood joints, identifying wood warp, and interpreting 2D & 3D plans

- Candidates must have experience in following health & safety procedures in construction, installing wood elements in structures, and joining of wood elements

- Candidates must be competent to install construction profiles, install wood hardware and to use safety equipment

- Carpentry/Joinery Certification/Apprenticeship/Trade preferred but not essential

- Candidates must have at least 3 years’ of relevant experience as a Carpenter/Joiner

Annual Remuneration: €46,644.00; Pay rate €23.00 per hour

Work Location: Conor Phelan Construction Limited, 4A Shandon Street, Dungarvan, Co Waterford, X35 NR40.

Number of hours work each week: 39

Qualifications:

No formal qualifications are required. Minimum of 2 years’ experience in the same or similar role is required. Additional training will be provided on-the-job.

General Duties / Responsibilities / Experience:

- To assemble, install, repair and maintain pipe systems, drains, gutters, ducts and related fittings for water, gas, drainage, sewerage and hvac systems

- To examine blueprints and drawings to determine the layout of plumbing and ventilation systems and the materials required

- To measure, cut, thread, bend, joint, assemble and install pipes, fittings and fixtures

- To lay clay, concrete or cast-iron pipes in ditches to form sewers, drains or water mains

- To inspect, examine and test installed systems and pipes using pressure gauge, hydrostatic testing and observation methods

- Essential knowledge for the role includes technical drawings, isometric perspective, health and safety hazards underground, and geometry

- Essential skills for the role include application of health & safety standards, assembly of manufactured pipeline parts, measurement of parts, and detection of flows in pipeline infrastructure

- Candidates must be able to operate soldering equipment, welding equipment and rigging equipment, and use metal bending techniques

- Candidates must be competent to interpret specifications such as pneumatics and hydraulics for installation on site according to the safety and production requirements

- Candidates must have prior experience in laying deep foul and surface water sewer pipes, building foul and surface water manholes

- Candidates must have experience in laying hdpe watermain, and in welding and testing watermain

- 2 years of previous relevant experience as a Pipe Fitter or similar is required

Annual Remuneration: €45,264.96; Pay Rate €22.32 per hour

Work Locations – Michael Cronin (Readymix) Unlimited Company t/a MC Group at:

- Coolcaslagh, Killarney, Co. Kerry, V93 XK82

- Caheragh Quarry, Castleisland, Co. Kerry, V92 K6C6

- Keim Quarry, Millstreet, Co. Cork, P51 DX29

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Key Responsibilities:

• Laying bricks, concrete blocks and other masonry materials to construct walls, foundations and structures
• Reading and interpreting construction drawings and specifications
• Ensuring all work is carried out to a high standard and in compliance with health & safety regulations
• Working as part of a team on various construction sites

To apply, please send your CV to hr@niaron.ie

We are seeking a highly skilled and experienced Carpenter to join our team on a full-time, permanent basis.

Key Responsibilities:

Read and interpret blueprints, drawings, and sketches to determine specifications and calculate requirements.

Measure, cut, shape, assemble, and join wood, wood substitutes, and other materials.

Construct, erect, install, and repair structures and fixtures such as walls, floors, ceilings, door and window frames, staircases, and roof trusses.

Install finished carpentry work, including trim, baseboards, crown molding, and cabinetry.

Inspect and replace damaged framework or other structures and fixtures.

Work with a variety of tools and equipment, including power saws, drills, sanders, and traditional hand tools.

Ensure all work is performed in compliance with Irish building codes, safety regulations, and quality standards.

Collaborate effectively with other tradespeople, including Plasterers, Electricians, and Plumbers.

To Apply:

Interested candidates who meet the above criteria are invited to submit their CV and a cover letter detailing their relevant experience

Closing Date for Applications: 24/ 04/2026

Qualifications:

Minimum 3 years of previous Carpentry/Joinery experience required. Carpentry/Joinery Certification/Apprenticeship/Trade preferred but not essential. There are no minimum academic requirements. Further training will be provided on-the-job as required.

General Duties / Responsibilities / Experience:

- To cut, shape, assemble, erect, maintain and repair various types of wood structures and fittings

- To cut, shape and assemble wooden elements for the construction of buildings & wooden installations

- To make, alter & repair structural and other woodwork at a workbench or on site

- To construct, erect and install framed wooden structures on site

- To fit, assemble, and alter internal and external fixtures of buildings, such as walls, doors, door & window frames, facings and panellings

- To build and install bespoke wood solutions for clients in various sectors

- Essential knowledge includes types of wood, wood cuts, and woodworking tools

- Further essential knowledge includes use of power tools, use of measurement instruments, and use of sawing equipment

- Essential skills include application of wood finishes, cleaning of wood surface, and creation of smooth wood surface

- Further essential skills include creating wood joints, identifying wood warp, and interpreting 2D & 3D plans

- Candidates must have experience in following health & safety procedures in construction, installing wood elements in structures, and joining of wood elements

- Candidates must be competent to install construction profiles, install wood hardware and to use safety equipment

- Carpentry/Joinery Certification/Apprenticeship/Trade preferred but not essential

- Candidates must have at least 3 years’ of relevant experience as a Carpenter/Joiner

Annual Remuneration: €46,644.00; Pay rate €23.00 per hour

Work Location: Noel Conway Construction Limited, 14 Railway Street, Dillonsland, Navan, Co. Meath, C15 DH59.

Number of hours work each week: 39

- Fabrication and assembly of custom wood structures and landscaping features in a workshop setting
- To cut, shape, assemble, erect, maintain and repair various types of wood structures and fittings
- To cut, shape and assemble wooden elements for the construction of wooden installations
- To make, alter & repair structural and other woodwork at a workbench or in workshop
- To construct, erect and install framed wooden structures in a landscape setting
- To fit, assemble, and alter internal and external fixtures of buildings, such as walls, doors, door & window frames, facings and panelling
- To build and install bespoke wood solutions for clients in various sectors
- Build and assemble custom wood structures such as pergolas, planter boxes, fences, decks (pre-fabrication), and outdoor furniture
- Interpret design drawings, blueprints, and specifications provided by the landscaping team
- Measure, cut, shape, and assemble wood materials with precision
- Operate and maintain woodworking tools and machinery safely
- Inspect finished products to ensure quality standards and design accuracy
- Collaborate with designers and project managers to meet project requirements and timelines

- Manage materials efficiently and report supply needs

- Maintain a clean, organized, and safe workshop environment

- Candidate must be competent to perform all job duties listed above

- Minimum of 3 years of experience working as a Carpenter

- Carpentry/Joinery Certification preferred but not essential

- Strong woodworking skills and attention to detailed wood craftsmanship required

- Proven experience as a carpenter or woodworker (shop-based experience preferred)

- Strong knowledge of woodworking techniques, tools, and materials

- Ability to read and interpret technical drawings and plans

- High attention to detail and commitment to quality craftsmanship

- Ability to work independently and manage time effectively

- Experience in custom outdoor structure fabrication

- Familiarity with landscaping design elements and materials is a bonus

- Basic knowledge of finishing techniques (staining, sealing, etc.)

Annual Remuneration: €36,605.00; Pay rate €18.05 per hour

Work Locations – Colm Ryan t/a Golden Grove Landscapes at:

- Camira, Mountmellick, Co. Laois, R32 AW77

- 200 Holly Road, Western Industrial Estate, Dublin 12, D12 X4EF

 

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Key Responsibilities & Duties:

- To ensure the safety, functionality, and compliance of drainage systems across a variety of civil engineering projects.

- To be responsible for inspecting, assessing, and reporting on drainage infrastructure, identifying blockages, defects, or structural issues, and supporting planned maintenance and rehabilitation programmes.

- Carry out inspections of public and private drainage systems, including CCTV surveys.

- Identify, assess, and record structural and service defects in pipelines, manholes, and associated infrastructure.

- Prepare detailed reports and condition assessments for project managers and clients.

- Support planned and reactive maintenance programmes.

- Ensure all work complies with health, safety, and environmental standards.

- Liaise with site teams, engineers, and subcontractors to support project delivery.

Requirements:

- Candidates must have the requisite experience and knowledge to perform all job duties listed above

- Minimum of 2 years previous experience as a Drain Inspector or in a similar role within civil engineering/utilities

- Familiarity with CCTV drainage inspection systems and industry software.

- Strong understanding of drainage infrastructure and maintenance practices.

- Ability to work independently and as part of a wider team.

- Excellent attention to detail and reporting skills.

- Experience working on large civil engineering or utilities contracts.

- A relevant certification is a plus but is not required

Annual Remuneration: €36,605.00; Pay Rate €18.05 per hour

Work Location: Gutyiera Limited, Unit 12 Shannon Valley Centre, Turvey Lane, Donabate, Co. Dublin, K36 P589

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Key Responsibilities & Duties:

- Inspect and assess drainage systems, pipework, and septic tanks to identify blockages, defects, and structural issues.

- Carry out CCTV drain surveys and use diagnostic equipment to evaluate the condition and performance of drainage networks.

- Record and classify defects, obstructions, and root ingress, and recommend appropriate repair or maintenance actions.

- Support drain cleaning, jetting, and repair operations, ensuring inspections are completed before and after works.

- Produce accurate reports and condition assessments for customers, supervisors, and management.

- Assist in planning and executing routine maintenance and emergency response activities.

- Ensure compliance with all health, safety, and environmental regulations and company procedures.

- Liaise with plumbers, engineers, and other team members to coordinate work efficiently and deliver excellent customer service.

 

Requirements:

- Candidates must have the requisite experience and knowledge to perform all job duties listed above

- Minimum of 2 years’ experience in drainage inspection, plumbing maintenance, or a related field.

- Proficiency in using CCTV inspection systems and related reporting software.

- Good understanding of drainage systems, pipework layouts, and maintenance techniques.

- Ability to identify drainage faults and recommend suitable repair methods.

- Comfortable working in confined spaces and outdoors in various weather conditions.

- Excellent attention to detail, communication, and reporting skills.

- Ability to work independently and as part of a small, responsive team

- Relevant certification for plumbing/drainage inspection is highly desirable

Annual Remuneration: €36,605.00; Pay Rate €18.05 per hour

Work Location: Tank Pipe and Drain Longford Limited t/a Glancy Enviro, Clonterm, Longford, Co. Longford, N39 H6T0.

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Qualifications:

1-3 years’ of previous experience as a HGV Driver is required. Applicants must hold an equivalent category to a category CE or C1E driving licence identified through a mutual recognition agreement between the Road Safety Authority and the appropriate regulatory authority in another jurisdiction). There are no minimum academic requirements. Further training will be provided on-the-job as required.

General Duties / Responsibilities / Experience:

- To safely operate HGVs, including loading and unloading cargo.

- To deliver goods to specified locations, ensuring they arrive on time and in good condition.

- To conduct daily vehicle checks and routine maintenance reporting to ensure roadworthiness.

- To comply with all driving regulations, including EU and Irish transport laws (e.g., tachograph and driver's hours regulations).

- To maintain accurate delivery records, including delivery notes and logbooks.

- To communicate professionally with customers, dispatchers, and team members to resolve delivery issues.

- To follow safety protocols for transporting hazardous materials (if applicable).

- To ensure the security of cargo during transit.

- Essential knowledge includes effective perception of the transport environment, the mechanical components of vehicles, and road traffic laws

- Further essential knowledge includes road transport legislation, types of cargo, and vehicle cargo capacity

- Essential skills include anticipation of foreseeable problems on the road, control of the performance of the vehicle, and interpretation of traffic signals

- Further essential competencies include maintenance of concentration for long periods, operation of GPS systems, and reading of maps

- Applicants must be competent to parallel park vehicles, practice emergency stops, and supervise the loading & unloading of cargo

- Applicants must have experience driving a cargo truck in both urban and rural environments

- 1-3 years’ of previous relevant experience as a HGV Driver is required

- Applicants must hold an equivalent category to a category CE or C1E driving licence identified through a mutual recognition agreement between the Road Safety Authority and the appropriate regulatory authority in another jurisdiction).

Annual remuneration: €36,605.00; Pay rate €18.05 per hour

Work Locations – Michael Cronin (Readymix) Unlimited Company t/a MC Group at:

- Coolcaslagh, Killarney, Co. Kerry, V93 XK82

- Caheragh Quarry, Castleisland, Co. Kerry, V92 K6C6

- Keim Quarry, Millstreet, Co. Cork, P51 DX29

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Location: UNIT D5
BROOKLODGE BUSINESS PARK

GLANMIRE

CO. CORK

T45 FK10

Contract: Full-time, Permanent

Hours: 39 hours per week

Salary: €36,605 per annum

Hearthstone Conservation Ltd is seeking skilled painters to join our team.

Duties will include: Apply paint, varnish, wallpaper and other protective and decorative materials to interior and exterior walls and surfaces, paint designs on wood, glass, metal, plastics and other materials, and stain, wax and french polish wood surfaces by hand. Prepares surfaces by cleaning, sanding and filling cracks and holes with appropriate filler. Mixes adhesive or removes self-adhesive backing and positions covering material on wall, matching up patterns where appropriate and removing wrinkles and air bubbles by hand or brush;

Key Responsibilities:

- To carry out all aspects of internal and external plastering, including skimming, bonding, float and set, rendering, and dry lining

- To perform patch repairs and surface restoration works as part of reactive maintenance or refurbishment contracts

- To prepare walls and ceilings by cleaning, applying bonding agents, and levelling surfaces prior to plastering

- To apply various finishes such as sand/cement render, gypsum plaster, and decorative coatings as per project requirements

- To undertake ceiling and wall repairs following electrical or plumbing installations

- To work on occupied and unoccupied premises, ensuring minimal disruption to clients and maintaining a professional manner at all times

- To inspect and assess damaged areas, determine the required materials and methods, and provide feedback to supervisors

- To ensure all works are completed to specification, on time, and to a high standard of finish

- To maintain accurate records of work completed and report any issues or delays to the Site Manager

- To comply with all Health, Safety, and Environmental (HSE) regulations, including correct use of PPE and safe work practices

- To maintain tools, materials, and equipment in good condition and report any defects

- To assist other trades (e.g., painters, carpenters, tilers) when required to support the overall facilities maintenance operation

Key Requirements:

- Ability to perform all job duties stated above

- Minimum 3 years’ experience in plastering, preferably within a facilities management, construction, or maintenance environment

- Strong knowledge of modern and traditional plastering techniques and materials

- Demonstrated ability to produce a high-quality finish across a variety of surfaces and environments

- Excellent attention to detail and commitment to delivering professional workmanship

- Ability to read and interpret technical drawings and specifications

- Strong communication skills with the ability to liaise effectively with clients, site supervisors, and team members

- Self-motivated, reliable, and capable of working independently with minimal supervision

Annual Remuneration: €46,644.00; Pay rate €23.00 per hour

Work Location: Conor Phelan Construction Limited, 4A Shandon Street, Dungarvan, Co Waterford, X35 NR40.

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Customer: Thomas Harrington Heating & Plumbing, Gortnagappul, Bonane, Kenmare, Co. Kerry V93 T9Y8
Salary: €38000 per annum
Hours per week: 40
Hourly Rate: €18.30

Key Responsibilities & Duties:

- Install, repair, and maintain plumbing systems, fixtures, pipework, and drainage infrastructure.

- Diagnose and resolve plumbing issues including leaks, blockages, and system faults.

- Carry out routine maintenance, emergency callouts, and repair works on drainage and water supply systems.

- Assist with cleaning, unblocking, and repair of drains and septic tanks as required.

- Read and interpret technical drawings, schematics, and job specifications.

- Ensure all work is completed safely, efficiently, and in compliance with relevant regulations and company procedures.

- Liaise with supervisors, engineers, and customers to provide updates and ensure satisfaction with completed works.

- Maintain accurate job records, reports, and service documentation.

Requirements:

- Candidates must have the requisite experience and knowledge to perform all job duties listed above

- Relevant trade/craft certification for plumbing/drainage inspection is required

- Minimum of 2 years’ experience as a qualified Plumber or in a similar role within plumbing, drainage, or utilities.

- Strong technical knowledge of plumbing systems, drainage layouts, and maintenance practices.

- Proficiency in diagnosing faults and carrying out effective repairs.

- Ability to work independently and as part of a team in both domestic and commercial environments.

- Excellent attention to detail, communication, and customer service skills.

Annual Remuneration: €36,605.00; Pay Rate €18.05 per hour

Work Location: Gutyiera Limited, Unit 12 Shannon Valley Centre, Turvey Lane, Donabate, Co. Dublin, K36 P589.

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Key Responsibilities & Duties:

- Install, repair, and maintain plumbing systems, fixtures, pipework, and drainage infrastructure in a construction environment

- Diagnose and resolve plumbing issues including leaks, blockages, and system faults.

- Carry out routine maintenance, emergency callouts, and repair works on drainage and water supply systems.

- Assist with cleaning, unblocking, and repair of drains and septic tanks as required.

- Read and interpret technical drawings, schematics, and job specifications.

- Ensure all work is completed safely, efficiently, and in compliance with relevant regulations and company procedures.

- Liaise with supervisors, engineers, and customers to provide updates and ensure satisfaction with completed works.

- Maintain accurate job records, reports, and service documentation.

Requirements:

- Candidates must have the requisite experience and knowledge to perform all job duties listed above

- Relevant trade/craft certification for plumbing/drainage inspection is an advantage but is not required if candidate has sufficient experience

- Minimum of 2 years’ experience as a Plumber or in a similar role within plumbing, drainage, or utilities.

- Strong technical knowledge of plumbing systems, drainage layouts, and maintenance practices.

- Proficiency in diagnosing faults and carrying out effective repairs.

- Experience working in the construction sector on large sites

- Ability to work independently and as part of a team in both domestic and commercial environments.

- Excellent attention to detail, communication, and customer service skills.

Annual Remuneration: €46,644.00; Pay rate €23.00 per hour

Work Location: Noel Conway Construction Limited, 14 Railway Street, Dillonsland, Navan, Co. Meath, C15 DH59.

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Qualifications:

Relevant scaffolding qualification/card is required. A minimum of 2 years’ experience in the same or similar role is required. Additional training will be provided on-the-job.

General Duties / Responsibilities / Experience:

- To put up scaffolds and platforms in order to make safe construction work at heights possible

- To erect and dismantle temporary metal scaffolding on structures and building sites

- To set up scaffolding around a structure, or inside a building g undergoing construction, renovation or demolition

- To understand and follow technical drawings and plans

- Essential knowledge includes scaffolding components and work at heights

- Essential knowledge includes erection and dismantle of various scaffolding systems, and relevant safety legislation and practices

- Essential skills include building scaffolding, constructing working platforms and dismantling scaffolding

- Essential skills include using construction safety equipment and working in a construction team

- Candidates must be competent to follow health and safety procedures in construction, following safety procedures when working at heights, and inspecting construction supplies

- Candidates must be competent to interpret 2D & 3D plans, position base plates, and position guardrails and toeboards

- Candidates must have experience in using measurement instruments, position sole plates, and recognising signs or corrosion and wood rot

- Scaffolding qualification/card is required

- 2 years of previous relevant experience as a Scaffolder is required

Annual remuneration: €41,999.88; Pay rate €20.71 per hour

Work Location: Coldridge Scaffolding Limited, Dunsoghly, St. Margaret’s, Co. Dublin, K67 AR26

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Qualifications:

Relevant scaffolding qualification/card is required. A minimum of 2 years’ experience in the same or similar role is required. Additional training will be provided on-the-job.

General Duties / Responsibilities / Experience:

Annual remuneration: €41,999.88; Pay rate €20.71 per hour

Work Locations:

· Intel Ireland’s Leixlip Campus, R148, Collinstown, Co. Kildare

· Pfizer, Grange Castle, Clondalkin, Co. Dublin

· Alexion Dublin Manufacturing Facility, College Business & Technology Park, Blanchardstown Road North, Blanchardstown, Dublin 15

· Eli Lilly Limerick, Raheen Business Park, Ballycummin, Co. Limerick

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Qualifications:

Minimum of 3 years’ experience as a Shuttering Carpenter in a previous role required. There are no minimum academic requirements. No formal qualification is required for this role. Further training will be provided on-the-job as required.

General Duties / Responsibilities / Experience:

- To construct, install, and repair a variety of commercial and industrial structures and fixtures using wood, steel and concrete

- To assemble and create wooden elements for the construction of buildings

- To cut, shape, assemble, erect and maintain various types of structures and fittings made from wood and other materials

- To make, alter and repair structural and other woodwork at a workbench or on a construction site

- To construct, erect and install heavy-framed wooden structures on building sites

- To fit, assemble and alter internal and external fixtures of buildings such as walls, doors, frames and panelling

- Essential knowledge includes types of wood, wood cuts and woodworking tools

- Essential skills include sawing, measuring, sketching and reading blueprints

- Candidate must be competent in creating wood joints, installing wood elements in structures and interpreting 2D & 3D plans

- Candidate must have experience in installing construction profiles, installing wood elements in structures and creating smooth wood surface

- Candidate must be familiar with and competent to implement all relevant construction health and safety procedures

- Minimum 3 years’ of relevant experience as a Shuttering Carpenter

Annual remuneration: €45,264.96; Pay rate €22.32 per hour

Work Location: Seán & Justin Murphy Limited t/a Murlock Construction, Cappanargid, Rathangan, Co. Kildare, R51 T258, and various sites in Ireland as per current projects.

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Qualifications:

A minimum of 3 years’ welding & fabrication experience is required. There are no minimum academic requirements. Welding certification is preferred.

General Duties / Responsibilities / Experience:

- To operate welding equipment in order to join metalwork pieces together

- To use fusion welding processes based on various techniques and materials

- To perform simple visual inspection of welds

- To perform fillet welds, mig welding and to read drawings

- To wear appropriate protective gear and adhere to safety standards

- To smooth burred surfaces and recognise metal imperfections

- To use sheet metal to construct roofs, ducts for heating & vents, gutters and other metal structures

- To read plans and determine type and amount of materials to be used

- To measure, bend, cut, shape and attach pieces if metal to create structure required

- This role requires knowledge of welding techniques, torch temperature for metal processes, metal thermal conductivity and fuel gas

- Essential knowledge includes welding from drawings (2D and 3D), mig welding and fillet welds

- Essential knowledge includes metal joining technologies, metal thermal conductivity, rivet types and metal types

- Essential skills include aligning components, joining metals and operating welding equipment, including oxy-fuel torch

- Essential skills include operation of handheld riveting equipment, interpretation of 2D & 3D plans, and tending metal sawing machine

- Candidates must be competent to apply arc & spot welding techniques and precision metalworking techniques

- Candidates must be competent to ensure correct metal temperature and handle fuels

- Candidates must have experience in recognising signs of corrosion and removing inadequate workpieces

- Candidates must have experience in performing metal active gas welding and inert gas welding

- Candidates must have 3 years’ of relevant experience as a Welder-Fabricator

- Welding certification preferred

Annual remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: Coolskeagh Development Limited t/a Castle Steel, Moraghy, Castleblayney, Co. Monaghan, A75 DD23.

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Qualifications:

A minimum of 3 years’ welding & fabrication experience is required. There are no minimum academic requirements. Welding certification is preferred.

General Duties / Responsibilities / Experience:

- To operate welding equipment in order to join metalwork pieces together

- To use fusion welding processes based on various techniques and materials

- To perform simple visual inspection of welds

- To perform fillet welds, mig welding and to read drawings

- To wear appropriate protective gear and adhere to safety standards

- To smooth burred surfaces and recognise metal imperfections

- To use sheet metal to construct roofs, ducts for heating & vents, gutters and other metal structures

- To read plans and determine type and amount of materials to be used

- To measure, bend, cut, shape and attach pieces if metal to create structure required

- This role requires knowledge of welding techniques, torch temperature for metal processes, metal thermal conductivity and fuel gas

- Essential knowledge includes welding from drawings (2D and 3D), mig welding and fillet welds

- Essential knowledge includes metal joining technologies, metal thermal conductivity, rivet types and metal types

- Essential skills include aligning components, joining metals and operating welding equipment, including oxy-fuel torch

- Essential skills include operation of handheld riveting equipment, interpretation of 2D & 3D plans, and tending metal sawing machine

- Candidates must be competent to apply arc & spot welding techniques and precision metalworking techniques

- Candidates must be competent to ensure correct metal temperature and handle fuels

- Candidates must have experience in recognising signs of corrosion and removing inadequate workpieces

- Candidates must have experience in performing metal active gas welding and inert gas welding

- Candidates must have 3 years’ of relevant experience as a Welder-Fabricator

- Welding certification preferred

Annual remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: Banagher Precast Concrete Limited, Queen Street, Banagher, Co. Offaly.

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Qualifications:

A minimum of 3 years’ welding & fabrication experience is required. There are no minimum academic requirements. Welding certification is preferred.

General Duties / Responsibilities / Experience:

- To operate welding equipment in order to join metalwork pieces together

- To use fusion welding processes based on various techniques and materials

- To perform simple visual inspection of welds

- To perform fillet welds, mig welding and to read drawings

- To wear appropriate protective gear and adhere to safety standards

- To smooth burred surfaces and recognise metal imperfections

- To use sheet metal to construct roofs, ducts for heating & vents, gutters and other metal structures

- To read plans and determine type and amount of materials to be used

- To measure, bend, cut, shape and attach pieces if metal to create structure required

- This role requires knowledge of welding techniques, torch temperature for metal processes, metal thermal conductivity and fuel gas

- Essential knowledge includes welding from drawings (2D and 3D), mig welding and fillet welds

- Essential knowledge includes metal joining technologies, metal thermal conductivity, rivet types and metal types

- Essential skills include aligning components, joining metals and operating welding equipment, including oxy-fuel torch

- Essential skills include operation of handheld riveting equipment, interpretation of 2D & 3D plans, and tending metal sawing machine

- Candidates must be competent to apply arc & spot welding techniques and precision metalworking techniques

- Candidates must be competent to ensure correct metal temperature and handle fuels

- Candidates must have experience in recognising signs of corrosion and removing inadequate workpieces

- Candidates must have experience in performing metal active gas welding and inert gas welding

- Candidates must have 3 years’ of relevant experience as a Welder-Fabricator

- Welding certification preferred

Annual remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: John Foley Building Solutions Limited, Upper Grange, Gowran, Co. Kilkenny, R95 AR24

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Qualifications:

1-3 years’ of previous welding experience required. Welding Certification preferred but not essential. There are no minimum academic requirements. Further training will be provided on-the-job as required. Candidates must be able to mig weld, perform fillet welds and read drawings

General Duties / Responsibilities / Experience:

- To operate welding equipment in order to join metalwork pieces together

- To use fusion welding processes based on various techniques and materials

- To perform simple visual inspection of welds

- To perform fillet welds, mig welding and to read drawings

- To wear appropriate protective gear and adhere to safety standards

- To smooth burred surfaces and recognise metal imperfections

- This role requires knowledge of welding techniques, torch temperature for metal processes, metal thermal conductivity and fuel gas

- Essential knowledge includes welding from drawings (2D and 3D), mig welding and fillet welds

- Essential skills include aligning components, joining metals and operating welding equipment, including oxy-fuel torch

- Candidates must be competent to apply arc welding techniques and precision metalworking techniques

- Candidates must be competent to ensure correct metal temperature and handle fuels

- Candidates must have experience in recognising signs of corrosion and removing inadequate workpieces

- Candidates must have experience in performing metal active gas welding and inert gas welding

- Candidates must have 1-3 years’ of relevant experience as a Welder

Annual remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: Pudaxa Limited, Unit 12 Shannon Valley Centre, Turvey Lane, Donabate, Co. Dublin, K36 P589

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Qualifications:

1-3 years’ of previous welding experience required. Welding Certification preferred but not essential. There are no minimum academic requirements. Further training will be provided on-the-job as required. Candidates must be able to mig weld, perform fillet welds and read drawings

General Duties / Responsibilities / Experience:

- To operate welding equipment in order to join metalwork pieces together

- To use fusion welding processes based on various techniques and materials

- To perform simple visual inspection of welds

- To perform fillet welds, mig welding and to read drawings

- To wear appropriate protective gear and adhere to safety standards

- To smooth burred surfaces and recognise metal imperfections

- This role requires knowledge of welding techniques, torch temperature for metal processes, metal thermal conductivity and fuel gas

- Essential knowledge includes welding from drawings (2D and 3D), mig welding and fillet welds

- Essential skills include aligning components, joining metals and operating welding equipment, including oxy-fuel torch

- Candidates must be competent to apply arc welding techniques and precision metalworking techniques

- Candidates must be competent to ensure correct metal temperature and handle fuels

- Candidates must have experience in recognising signs of corrosion and removing inadequate workpieces

- Candidates must have experience in performing metal active gas welding and inert gas welding

- Candidates must have 1-3 years’ of relevant experience as a Welder

Annual remuneration: €36,605.00; Pay rate €18.05 per hour

Work Location: Conor Phelan Construction Limited, 4A Shandon Street, Dungarvan, Co Waterford, X35 NR40.

Number of hours work each week: 39

If you're interested in this role, please apply with an up-to-date CV to info@crewitresourcing.com or call 019020688 to enquire for more details.

Qualifications:

1-3 years’ of previous welding experience required. Welding Certification preferred but not essential. There are no minimum academic requirements. Further training will be provided on-the-job as required. Candidates must be able to mig weld, perform fillet welds and read drawings

- To operate welding equipment in order to join metalwork pieces together

- To use fusion welding processes based on various techniques and materials

- To perform simple visual inspection of welds

- To perform fillet welds, mig welding and to read drawings

- To wear appropriate protective gear and adhere to safety standards

- To smooth burred surfaces and recognise metal imperfections

- This role requires knowledge of welding techniques, torch temperature for metal processes, metal thermal conductivity and fuel gas

- Essential knowledge includes welding from drawings (2D and 3D), mig welding and fillet welds

- Essential skills include aligning components, joining metals and operating welding equipment, including oxy-fuel torch

- Candidates must be competent to apply arc welding techniques and precision metalworking techniques

- Candidates must be competent to ensure correct metal temperature and handle fuels

- Candidates must have experience in recognising signs of corrosion and removing inadequate workpieces

- Candidates must have experience in performing metal active gas welding and inert gas welding

- Candidates must have 1-3 years’ of relevant experience as a Welder

Annual remuneration: €36,605.00; Pay rate €18.05 per hour

Work Locations – Crewit Resourcing Limited at:

- 2004 Orchard Avenue, Citywest Business Campus, Co. Dublin, D24 YK28

- Killamuck, Abbeyleix, Co. Laois, R32 YD86

 

Number of hours work each week: 39